Introduction

136
• Nozzles and Pressure: Use 40 psi (275 kPa) when using conventional flat fan nozzles. Low drift nozzles may require
higher pressures for proper performance. Use a combination of nozzles and pressure designed to deliver thorough,
even coverage with ASABE coarse droplets
Refer to specific labels for recommended water volumes.
How it Works:
Refer to Table 9 on page 48.
Effects of Growing Conditions:
Best weed control when humidity is high at the time of spraying and for the following day or two. Prolonged cool
conditions may result in reduced weed control. Spraying during early morning may increase the risk of flax injury.
Avoid spraying in temperatures greater than 25 o C.
DO NOT apply to flax, canaryseed or corn if daytime temperatures exceed 27 o C within 48 hours before or after application.
Tank Mixes:
Tank mix partners applied at all label rates and include recommended adjuvants unless otherwise noted.
Herbicide Tank Mix Table:
Crop & Tank Mixes Badge Buctril M Logic M Mextrol 450
Flax (including Solin):
Poast Ultra + Merge adjuvant
Clethodim + adjuvant * ** *
Spring wheat (including durum) and Barley:
Liquid Achieve
Ally
MCPA (amine, ester & K)
Refine SG (4 g per acre) #
Cordon
Puma Advance
Puma Advance + Refine SG (rates above)
Spring wheat (including durum):
Everest 2.0
Varro
Spring wheat only (NOT including durum):
Axial
Spring wheat only (NOT including durum) and Barley:
Axial
Winter Wheat:
Refine SG (4 g per acre)#
Oats:
MCPA (amine, ester & K)
Corn:
AAtrex
* Select only
** Select and Centurion only.
*** Buctril M only
# Requires the addition of a surfactant as per Refine SG.