15.03.2017 Views

Introduction

87089-2017%20Guide%20to%20Crop%20Protection_complete

87089-2017%20Guide%20to%20Crop%20Protection_complete

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

417<br />

Ultra Blazer applied at 1.0 L per acre** (one jug treats 10 acres) will control the weeds above plus the following weeds at<br />

the maximum leaf stages listed:<br />

Weed<br />

Maximum Stage<br />

Canada thistle*<br />

Pre-bud<br />

Cocklebur<br />

4 leaf<br />

Common milkweed* -<br />

Field bindweed* -<br />

Hedge bindweed* -<br />

Lamb’s-quarters<br />

2 leaf<br />

Nightshade (eastern black)<br />

6 leaf<br />

Redroot pigweed<br />

6 leaf<br />

Smartweed (including lady’s- thumb<br />

8 leaf<br />

Wild Mustard<br />

2 leaf<br />

Weed Control<br />

* Topgrowth control only. The plant will grow back from underground roots<br />

** DO NOT add Assist adjuvant with the 1.0 L per acre rate as crop injury will result.<br />

Refer to the product label for complete mixing instructions for this product and its mixes. A general guide to mixing<br />

can be found on page 8.<br />

Application Information:<br />

• Water Volume: No specific water volume is provided on the label but a minimum of 81 L per acre is implied by the<br />

adjuvant rates on the label. Good coverage of weed foliage is required for proper control.<br />

• Nozzles and Pressure: Use nozzles and pressure designed to deliver thorough, even coverage with ASABE medium<br />

droplets.<br />

How it Works:<br />

Refer to Table 9 on page 48.<br />

Effects of Growing Conditions:<br />

Soybeans may exhibit speckling, bronzing and/or leaf burn. The trifoliolate leaf emerging at the time of application may<br />

be distorted. Soybeans usually outgrow these conditions and continue to grow at a normal rate with no adverse effect on<br />

vigour, maturity, or crop yield. It is important to have good spray coverage on the weeds as Ultra Blazer works mainly by<br />

contact action. Failure to follow the suggested application rate and timing may result in unsatisfactory control.<br />

Tank Mixes:<br />

Herbicides:<br />

• Ultra Blazer (0.5 L per acre) plus Basagran Forté (0.5 L per acre)<br />

• Ultra Blazer (0.255 L per acre) plus Basagran* or Basagran Forté (0.71 L per acre) depending on predominant weed<br />

species present.<br />

º See label for details.<br />

* Add Assist adjuvant at 0.5 L per 100 L of spray solution for Basagran tank mix only.<br />

Fertilizers: None registered. DO NOT add fertilizers to the spray mixture.<br />

Insecticides: None registered.<br />

Fungicides: None registered.<br />

Note: The above mixes are those listed on the Ultra Blazer label only.<br />

Adding ingredients in the correct order is critical for optimum performance. Check labels of products to be mixed for<br />

directions. General guidelines can be found on page 8.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!