15.03.2017 Views

Introduction

87089-2017%20Guide%20to%20Crop%20Protection_complete

87089-2017%20Guide%20to%20Crop%20Protection_complete

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

154<br />

Effects of Growing Conditions:<br />

Moderate rainfall (10 to 20 mm), or equivalent irrigation, is required within 7 to 10 days for activation. Dry conditions that<br />

persist after application may reduce weed control. Heavy rainfall after application may dilute the active layer and result in<br />

reduced weed control.<br />

DO NOT apply when temperature exceed 25 o C due to increased risk of vapour drift. Temporary whitening/yellowing of the crop<br />

may occur when emerging from treated soil.<br />

Tank Mixes:<br />

None registered.<br />

FMC Corporation supports the following tank mixes that are not on the Command label. Apply mixes according to the<br />

most restrictive use limitations for either product:<br />

• Herbicides: Glyphosate (180 to 360 g ae per acre)<br />

Adding ingredients in the correct order is critical for optimum performance. Check labels of products to be mixed for<br />

directions. General guidelines can be found on page 8.<br />

Restrictions:<br />

• Rainfall: Moderate rainfall after application is required for activation. Heavy rainfall shortly after application may<br />

reduce activity.<br />

• Re-entry Interval: DO NOT enter treated fields for at least 12 hours.<br />

• Grazing Restrictions: DO NOT graze the treated crop or cut for hay.<br />

• Re-cropping Interval: Canola, corn (field, sweet), dry bean (kidney, navy), field pea, potatoes, soybean and spring<br />

wheat may be planted the year after application. All other crops may be planted 16 months after application.<br />

• Aerial Application: DO NOT apply by air.<br />

• Storage: Store above 5 o C to keep from freezing. If frozen, thaw before use. If solid crystals are observed, warm to<br />

above 15 o C and shake or roll container periodically to dissolve solids. DO NOT store near heat or open flame.<br />

• Buffer Zones: DO NOT apply Command 360 ME within 90 metres of sensitive plants and sensitive terrestrial habitats or<br />

within 370 metres of fruit, nursery and greenhouse production. A buffer zone of 370 metres should also be observed<br />

for applications adjacent to residential areas and established vegetation. DO NOT apply Command 360 ME directly to<br />

surface water or to areas where runoff is likely to occur.<br />

See page 35 for an explanation of the different habitats.<br />

* Buffer zones can be reduced by 70% when using shrouds and by 30% when using cones mounted less than<br />

12 inches from the crop canopy.<br />

†<br />

Distance measured as metres from the downwind edge of the spray boom to sensitive habitat.<br />

º Spray when winds are under 16 km/hr, but not dead calm.<br />

Sprayer Cleaning:<br />

Refer to 'Method C' in the general section on sprayer cleaning on page 9 and 10.<br />

Hazard Rating:<br />

Caution – Poison<br />

Potential skin sensitizer<br />

For an explanation of the symbols used here see page 4.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!