15.03.2017 Views

Introduction

87089-2017%20Guide%20to%20Crop%20Protection_complete

87089-2017%20Guide%20to%20Crop%20Protection_complete

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

379<br />

• Weeds Suppressed:<br />

º Canada thistle<br />

(less than 6 inches<br />

or 15 cm tall or<br />

across)**<br />

º Cleavers<br />

(1 to 3 whorls)<br />

º Round-leaved<br />

mallow (2 to 6 leaf)<br />

º Scentless chamomile<br />

º Sow-thistle (less<br />

than 6 inches or 15<br />

cm tall or across)**<br />

* Refine SG: up to 5 leaf stage; 75%WDG formulations: up to 3 leaf stage only.<br />

** Prior to budding<br />

º Stork’s-bill<br />

(2 to 6 leaves)<br />

º Toadflax (less than 6<br />

inches or 15 cm tall)<br />

Rate:<br />

Refine SG: 12 g per acre (one 486 g container treats 40 acres).<br />

75%WDG formulations: 8 g per acre (one 320 g container treats 40 acres).<br />

Add Agral 90, Agsurf, or Citowett Plus surfactants at 0.2 L per 100 L of spray solution.<br />

75%WDG formulations may also use Liberate and Nufarm Enhance surfactants at 0.2 L per 100 L of spray solution.<br />

Maximum of one application per year of Thifensulfuron/tribenuron or other products with the same active ingredients.<br />

Thifensulfuron/tribenuron may degrade if left in the sprayer for an extended period. Apply within 24 hours of mixing. Refer<br />

to the product label for complete mixing instructions.<br />

A general guide to mixing can be found on page 8.<br />

Weed Control<br />

Application Information:<br />

• Water Volume:<br />

º Ground: Minimum 22 L per acre.<br />

º Aerial (Refine SG only): Minimum 10 L to maximum 20 L per acre.<br />

• Nozzles and Pressure: Use 30 to 40 psi (210 to 275 kPa) when using conventional flat fan nozzles. Low drift nozzles<br />

may require higher pressures for proper performance. Use a combination of nozzles and pressure designed to deliver<br />

thorough, even coverage with ASABE medium droplets.<br />

• Screens: Use a 50 mesh or coarser screen and filter system.<br />

How it Works:<br />

Refer to Table 9 on page 48.<br />

Effects of Growing Conditions:<br />

DO NOT apply to wheat, barley or oats that are stressed by severe weather conditions (frost, drought or water saturated soil)<br />

as crop injury may result.<br />

Under certain conditions (heavy rainfall, prolonged cool weather, frost conditions, wide fluctuations in day/night<br />

temperatures) lightening in crop colour and reduction in crop height may occur.<br />

Tank Mixes:<br />

Herbicides:<br />

• Tank mix partners applied at all label rates. Recommended adjuvants are used unless otherwise noted.<br />

Tank Mix Partner<br />

Crops<br />

Spring<br />

wheat<br />

Winter<br />

wheat<br />

Durum Barley Oats<br />

2,4-D amine or ester (160 to 212 g ae per acre)* † <br />

Clodinafop 240EC (95 to 115 mL per acre) plus Score adjuvant <br />

Clodinafop 240EC (95 mL per acre) + Dicamba (Banvel II rates<br />

below) plus Score adjuvant<br />

<br />

Δ<br />

Clodinafop 240EC (95 mL per acre)<br />

+ MCPA ester (0.23 G or 0.34 to 0.45 L per acre)* plus Score adjuvant

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!