15.03.2017 Views

Introduction

87089-2017%20Guide%20to%20Crop%20Protection_complete

87089-2017%20Guide%20to%20Crop%20Protection_complete

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

125<br />

Maximum ONE APPLICATION of this product or other products containing pyraflufen WITHIN A TWO YEAR TIME SPAN.<br />

Blackhawk may degrade if left in the sprayer for an extended period under alkaline conditions. Apply within 24 hours of<br />

mixing.<br />

Application Information:<br />

• Water Volume: Minimum 20 L per acre up to 40 L per acre (recommended).<br />

• Nozzles and Pressure: Flat fan nozzles operated at a pressure of 30 to 40psi (210 to 275 kPa) are recommended. Use<br />

nozzles and pressure designed to deliver thorough, even coverage with ASABE medium droplets. Boom height must<br />

be 60 cm or less above the crop or ground.<br />

• Screens: Use 50 mesh or coarser on both nozzle and primary plumbing screens.<br />

How it Works:<br />

Refer to Table 9 on page 48.<br />

Effects of Growing Conditions:<br />

Control may be reduced if weeds are under stress (e.g. drought, heat or cold stress). Weeds hardened off by cold weather or<br />

drought may not be adequately controlled or suppressed.<br />

Tank Mixes:<br />

Herbicides:<br />

Pre-seed and Pre-emergent:<br />

• Glyphosate (180 to 360 g ae per acre) (no surfactant required)<br />

Note: The above mixes are those listed on the Blackhawk label only. Nufarm Agriculture also supports the following<br />

mixes that are not on the Blackhawk label.<br />

• Herbicides:<br />

º In fall: Valtera (spring seeded chickpea, field pea, soybean, spring wheat)<br />

º In spring: Valtera (soybean only)<br />

Adding ingredients in the correct order is critical for optimum performance. Check labels of products to be mixed for<br />

directions. General guidelines can be found on page 8.<br />

Weed Control<br />

Restrictions:<br />

• Rainfall: No rainfast period is specified on the label. Consult the manufacturer.<br />

• Re-entry Interval: DO NOT enter treated fields for 12 hours.<br />

• Pre-harvest Interval: DO NOT harvest for feed or forage for 30 days.<br />

• Grazing Restrictions: DO NOT graze the treated crop or cut for hay for 30 days after application. DO NOT allow<br />

lactating dairy cows to graze for 7 days after application. Animals intended for meat should be withdrawn from<br />

treated fields 3 days before slaughter.<br />

• Storage: Store in a cool, dry place away from direct sunlight. May be frozen. If frozen, allow to warm to 10 to 20°C and<br />

shake thoroughly before use.<br />

• Buffer Zones:<br />

Application method<br />

Buffer Zones (metres † ) Required for the Protection of:<br />

Aquatic Habitats of Depths<br />

Terrestrial habitat<br />

Less than 1 m<br />

Greater than 1 m<br />

Ground* 1 1 2<br />

* Buffer zones can be reduced by 70% when using shrouds and by 30% when using cones mounted less than<br />

12 inches from the crop canopy.<br />

†<br />

Distance measured as metres from the downwind edge of the spray boom to sensitive habitat.<br />

Sprayer Cleaning:<br />

Refer to ‘Method A’ in the general section on sprayer cleaning on page 9 and 10.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!