15.03.2017 Views

Introduction

87089-2017%20Guide%20to%20Crop%20Protection_complete

87089-2017%20Guide%20to%20Crop%20Protection_complete

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

615<br />

Application Information:<br />

Vibrance XL is for use on-farm and closed commercial seed treatment facilities. Uneven or incomplete seed coverage may<br />

not give the desired level of disease control. Depending on seed size, Vibrance XL may be applied as a ready-to-apply<br />

application or water may be added to form slurry for more uniform colverage.<br />

These products may contain a pigment that will adequately colour treated seed. However, ensure that treated seed has an<br />

unnatural colour after treatment, when dried and ready for bagging. Regulations pertaining to the Seeds Act must be strictly<br />

adhered to when using this product. An appropriate colourant must be added when this product if the pigment does not<br />

colour the seed adequately.<br />

How it Works:<br />

The active ingredient difenoconazole is a triazole fungicide with broad-spectrum, systemic activity. Metalaxyl-M is an<br />

acylalanine fungicide with systemic activity against diseases caused by the Oomycetes, including Pythium dampingoff.<br />

Sedaxane is a succinate dehydrogenase inhibitor fungicide with systemic activity that inhibits fungal metabolism<br />

by binding to the succinate dehydrogenase enzyme to disrupt cellular respiration and energy generation. For more<br />

information refer to “Fungicide Modes of Action” on page 435.<br />

Tank Mixes:<br />

Vibrance XL may be mixed with Cruiser 5FS in commercial seed treatment facilities with closed transfer for crops common to<br />

the registered labels of Vibrance XL and Cruiser 5FS. Apply mixes according to the most restrictive use limitations for either<br />

product.<br />

Restrictions:<br />

Resistance management: Refer to page 434.<br />

• Labelling: Vibrance XL-treated seed must be labelled (listing only the applicable active ingredients) as follows: “This<br />

seed has been treated with difenoconazole, metalaxyl-M (and S-isomer), and sedaxane fungides. Wear long-sleeved<br />

shirt, long pants, and chemical-resistant gloves when handling treated seed. Do not graze or feed livestock on seeded<br />

area for 45 days after planting. Do not use for food, feed, or oil processing. Store away from food and feed.”<br />

• Grazing: DO NOT graze or feed livestock on treated areas for 45 days after planting.<br />

• Re-cropping: DO NOT plant any crop other than cereals within 60 days to fields in which treated seed were planted.<br />

• Storage: Store away from food and feed. Ideal storage temperature is above freezing and below 30°C. If product<br />

should freeze, bring to room temperature, and then ensure the contents are mixed well prior to application.<br />

• Environment: Toxic to aquatic organisms. DO NOT contaminate irrigation or drinking water supplies or aquatic<br />

habitats by cleaning of equipment or disposal of wastes. Any spilled or exposed seeds must be incorporated into the<br />

soil or otherwise cleaned-up from the soil surface.<br />

Hazard Rating:<br />

Caution – Poison (Vibrance 500 FS)<br />

For an explanation of the symbols used here see page 4.<br />

Seed Treatments

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!