F. K. Kong MA, MSc, PhD, CEng, FICE, FIStructE, R. H. Evans CBE, DSc, D ès Sc, DTech, PhD, CEng, FICE, FIMechE, FIStructE (auth.)-Reinforced and Prestressed Concrete-Springer US (1987)

References 291
11 Beeby, A. W. The Design of Sections for Flexure and Axial Load according to
CP 110 (Development Report No. 2). Cement and Concrete Association,
Slough, 1978.
12 Kawakami, M., Tokuda, H., Kagaga, M. and Hirata, M. Limit states of
cracking and ultimate strength of arbitrary concrete sections under biaxial
bending. Proc. ACI, 82, No. 2, March/April 1985, pp. 203-12.
13 Davister, M. D. Analysis of reinforced concrete columns of arbitrary geometry
subjected to axial load and biaxial bending-a computer program for exact
analysis. Concrete International, 8, No. 7, July 1986, pp. 56-61.
14 Kwan, K. H. and Liauw, T. C. Computer aided design of reinforced concrete
members subjected to axial compression and biaxial bending. The Structural
Engineer, 638, No. 2, June 1985, pp. 34-40.
15 MacGregor, J. G., Breen, J. E. and Pfrang, E. 0. Design of slender concrete
columns. Proc. ACI, 61, No. 1, Jan. 1970, pp. 6-28.
16 Cranston, W. B. Analysis and Design of Reinforced Concrete Columns.
(Research Report No. 20). Cement and Concrete Association, Slough, 1972.
17 Beal, A. N. The design of slender columns. Proc. ICE (Part 2), 81, Sept. 1986,
pp. 397-414.
18 Kong, F. K., Garcia, R. C., Paine, J. M., Wong, H. H. A., Tang, C. W. J. and
Chemrouk, M. Strength and stability of slender concrete deep beams. The
Structural Engineer, 648, No. 3, Sept. 1986, pp. 49-56.
19 Kong, F. K., Paine, J. M. and Wong, H. H. A. Computer aided analysis and
design of slender concrete columns. Proceedings of the First International
Conference on Computer Applications in Concrete. Singapore Concrete
Institute/Nanyang Technological Institute, Singapore, March 1986, pp. C68-
C98.
20 Kong, F. K. and Wong, H. H. A. Buckling failure of slender concrete
columns-a computer method. Proceedings of the International Conference
on Structural Failure. Singapore Concrete Institute/Nanyang Technological
Institute, Singapore, March 1987, pp. J15-J51.