Metal Foams: A Design Guide

102 Metal Foams: A Design Guide
Harte, A.-M., Fleck, N.A. and Ashby, M.F. (1999) Fatigue failure of an open cell and a closed
cell aluminum alloy foam. Acta Materialia 47(8), 2511–2524.
McCullough, K.Y.G., Fleck, N.A. and Ashby, M.F. (1999). The stress-life behavior of aluminum
alloy foams. Submitted to Fatigue and Fracture of Engng. Mats. and Structures.
Olurin, O.B., Fleck, N.A. and Ashby, M.F. (1999) Fatigue of an aluminum alloy foam. In
Banhart, J., Ashby., M.F. and Fleck, N.A. (eds), Metal Foams and Foam Metal Structures,
Proc. Int. Conf. Metfoam’99, 14–16 June 1999, MIT Verlag, Bremen, Germany.
Schultz, O., des Ligneris, A., Haider, O. and Starke, P (1999) Fatigue behavior, strength and
failure of aluminum foam. In Banhart, J., Ashby, M.F. and Fleck, N.A. (eds), Metal Foams
and Foam Metal Structures, Proc. Int. Conf. Metfoam’99, 14–16 June 1999, MIT Verlag,
Bremen, Germany.
Shwartz, D.S., Shih, D.S., Evans, A.G. and Wadley, H.N.G. (eds) (1998) Porous and Cellular
Materials for Structural Application, Materials Reseach Society Proceedings, Vol. 521, MRS,
Warrendale, PA, USA.
Sugimura, Y., Rabiei, A., Evans, A.G., Harte, A.M. and Fleck, N.A. (1999) Compression fatigue
of cellular Al alloys. Mat. Sci. and Engineering A269, 38–48.
Suresh, S. (1991) Fatigue of Materials, Cambridge University Press, Cambridge.
Zettel, B. and Stanzl-Tschegg, S. (1999) Fatigue of aluminum foams at ultrasonic frequencies.
In Banhart, J., Ashby, M.F. and Fleck, N.A. (eds), Metal Foams and Foam Metal Structures,
Proc. Int. Conf. Metfoam’99, 14–16 June 1999, MIT Verlag, Bremen, Germany.