sejal architectural glass limited - Securities and Exchange Board of ...

� Reliability- The problem of unstable quality of product, which is common with others
processes, is minimized in float process.
� Wider range of products- Float process is capable of producing a wider range of product
sizes and thickness than is possible with other glass processes. It can have ranges from
2mm to 25 mm as against 2mm to 6mm with other processes. Therefore, the same has
higher flexibility in serving market requirements.
Our company proposes to set up a float glass division for manufacturing float glass
For further details about the project please refer to the section titled “Objects of the Issue”
starting on page [●] of this Draft Red Herring Prospectus.
Types of float glass
FLOAT GLASS PRODUCTION PROCESS
Raw materials required for the production of float glass are Silica Sand, Soda Ash, Dolomite,
Limestone, Feldspar, Sodium Sulphate, Carbon, and Cullet. The system of raw materials
consists of raw materials storage, weighing and mixing systems.
100