sejal architectural glass limited - Securities and Exchange Board of ...

Features
� Valuable energy conservation
� Optimum working level's comfort via sound and heat reduction
� Step glazing and triple glazing options
� Minimizes chances of condensation on the exterior of glass
� Low Moisture Permeability
Following are our brands of insulating glass:
(a) Kool Glass
Kool Glass range of Insulating Glass Units (IGUs) is ideal for maximizing natural light and
uniform levels of comfort. It helps strike an optimum balance between transparency and
thermal insulation. Kool Glass is ideal for external wall claddings, internal partitions, doors,
windows and skylights for the thermal or acoustic insulation. Manufactured through state- ofart
technology licenced from Lisec, Austria; this glass is suitable for thermal insulation in
transport, pharmaceuticals and refrigeration industries. Kool IGUs enable reduction in Shading
Coefficients from 12-85% and Ultraviolet Values in the 50-85%, resulting in substantial savings in
the initial investments and recurring costs of air conditioning equipments.
The state- of-art technology permits production of Kool IGU in double and tripled glazed
versions with a provision for conventional, structural, stepped (one/ two/three sided steps)
and point fixed mountings. The range boasts of a wide choice of clear, tinted and coated glass
in annealed, heat- strengthened, toughened and laminated form.
Key features of Kool Glass include:
i. Reduces investments in air conditioning and heating
ii. Substantial savings in recurring cost of energy consumption
iii. Better and uniform comfort levels due to reduction of disagreeable drafts near glazed
areas
iv. Scope for incorporating larger glazed areas without increasing room temperature or
electric consumption
v. Superior sound attenuation
vi. Aesthetic look in the building
(b) Tone Glass
Tone glass is specially designed acoustic Insulating Glass Unit, which is ideally suited for noise
control. With the help of Tone Glass, sound attenuations upto 50 dB can be achieved. The units
could be configured with high performance glasses to achieve thermal insulation with acoustic
insulation for special requirements.
2. TOUGHENED GLASS
92