Brother XL-6053/6063 - Guide utilisateur
Brother XL-6053/6063 - Guide utilisateur
Brother XL-6053/6063 - Guide utilisateur
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
MAINTENANCE<br />
MANTENIMIENTO<br />
MANUTENZIONE<br />
Changing the Light Bulb<br />
CAUTION<br />
• Turn off the main power switch and unplug the machine<br />
before changing the light bulb. If the main power switch<br />
is on when the light bulb is changed, an electric shock<br />
may result. If the machine is on and foot controller is<br />
stepped on, injuries may result.<br />
• To avoid burns, give the light bulb time to cool before<br />
changing it.<br />
A<br />
1. Remove the power supply plug from the outlet.<br />
2. Loosen the screw on the reverse side of sewing head as shown<br />
in fig. A.<br />
3. Remove the light cover from the machine as illustrated in fig. A.<br />
B<br />
1<br />
1<br />
4. Replace the sewing light bulb. (See fig. B)<br />
1 Bulb<br />
1 Loosen<br />
2 Tighten<br />
2<br />
C<br />
5. Reattach the light cover and fasten the screw as shown in fig.<br />
C.<br />
77
Change language