Simulator 16 User Guide - PowerWorld

Click to remove the checkmark in Use Area/Zone Filters.
Verify that no other options are selected.
Click the Do Insert Contingencies button to accept the remaining default values and
automatically insert the branch contingencies.
Click Yes when asked to confirm the insertion of 11 contingencies.
Note that the Contingencies Tab of the Contingency Analysis Dialog now shows 12 contingencies.
Right-click on the list display of the contingencies tab and select Insert Special > Auto Insert
Contingencies from the local menu.
Select Single Generating Unit then click the Do Insert Contingencies button. Click Yes to
complete the auto insert of 4 generator contingencies.
Note that the Auto Insert tool did not insert a contingency for the generator connected to the Slack
Bus. You can manually insert slack bus generator contingencies.
The contingencies tab now shows 16 contingency records. You can click on an individual record and
view its information in the Contingency Definition section of the Contingencies Tab.
The next section of the tutorial discusses running the contingency analysis.
©2011 PowerWorld Corporation
1 2 3 4 5 6 7 8 9 10 11
Prev Next
1102