Simulator 16 User Guide - PowerWorld

Transient Stability Results: Time Values from RAM
The Time Values from RAM are found as a sub-tab under he Results page is found on the Transient
Stability Analysis dialog. The table lists values for each of the selected objects and fields as columns
and the various time steps as rows. Note that for time-step at which an event (such as a fault) occurs,
there may be multiple time steps listed showing the same time. The first listed time step will represent
the system state immediately before that time (T-) and the second listed time step will represent the
system state immediately after the events occur. There are also options along the left to choose which
fields to show as columns as well a column filtering options to use an advanced filter to limit the
columns. Finally there is an option to specify whether columns should be sorted first by Object then
Field or by Field then Object. This is all depicted in the following image.
Note that when the Process Contingencies option is set to One Contingency at a Time, the list will
only apply to the presently active contingency chosen from the For Contingency drop-down menu.
(See Transient Stability: Running Multiple Contingencies.)
©2011 PowerWorld Corporation
1605