Simulator 16 User Guide - PowerWorld

To track the limits of any of these devices, check the appropriate checkbox. Next to each checkbox
there is a dropdown box for selecting an advanced filter to apply to the tracking. A new filter can be
defined for a particular device by clicking the Define button next to that device. The filter will limit
the number of devices that get tracked. It is a good idea to define a filter for tracking devices so
that all elements in the case will not be tracked. Keep in mind that tracking any quantities will take
up space in the computer memory. If too many devices are tracked, it is possible to run out of
memory.
With these options, device limits are only tracked in the base case at valid transfer levels. No device
limit tracking is done with contingencies implemented.
©2011 PowerWorld Corporation
1199