Acorn Communicator Filestore Manager's Guide

More documents

Recommendations

Info

If all the users are within shouting distance, this is probably the quickest way to tell them. If not: 1. Select the main menu, press LOGON and log on as SYST. 2. Select BASIC, or the command screen of an application, and type: *USERS I
4. After approximately two minutes, the message Disc formatted should appear on your screen. If you see a different message or no message is displayed after 5 minutes, check what to do next by referring to Appendix 2. 5. You can now remove the disc by pressing the disc drive eject button. Write the disc's title on its label. 6. To format another disc, repeat steps 2 to 5. Adding a user When you want to allow a new person to use FileStore: 1. Select the NETMGR task and then select as current disc the disc that you want to create their user directory on (see Selecting NETMGR). 2. Press the NEW USER key. This will display the following: Name of new user 3. Type the user identity that the user will type to log on, followed by I. This may be up to 10 characters long. 4. If the user identity is accepted, after a short delay the display will show: id is now a user Press SPACE to return to menu 5. Press the spacebar to return to the initial NETMGR screen. Removing a user To remove a user's id and directory: 1. Select NETMGR (see Selecting NETMGR). 2. Select the disc containing their directory as the current disc (see Selecting NETMGR). 3. Press the DEL USER key. This will produce the prompt: Name of user to be removed 4. Type the user identity that you want to remove, followed by I
Page 1 and 2: Acorn Communicator Acorn= choice of
Page 3 and 4: Important: WARNING: THIS APPARATUS
Page 5 and 6: Appendix 1: INSTALLING FILESTORE 39
Page 7: 1 ABOUT THIS GUIDE Introduction Fil
Page 10 and 11: The 'root' directory In a simple sy
Page 12 and 13: Logging on User identification (id)
Page 14 and 15: `Insurance' The best 'insurance' ag
Page 16 and 17: that must be done while FileStore i
Page 18 and 19: Type: password! 4-i 1 (where passwo
Page 20 and 21: 5. This will return you to the main
Page 22 and 23: without letting FileStore know you
Page 26 and 27: and show the directory tree of the
Page 28 and 29: If you are copying a file: 4. Type
Page 30 and 31: To change your password: 1. Return
Page 32 and 33: 1. There should be three sets of ha
Page 34 and 35: (For example, if a user creates a f
Page 36 and 37: 3. Type: *DISCS This displays the t
Page 38 and 39: Examining discs To display a single
Page 40 and 41: Changing the FileStore has its own
Page 42 and 43: Changing the maximum number of user
Page 45 and 46: Appendix 1: INSTALLING FILESTORE Yo
Page 47 and 48: FileStore Discs The function of eac
Page 49 and 50: The function of each of these featu
Page 51 and 52: doing this now will help prevent pr
Page 53 and 54: 6. Log on as SYST. On your Communic
Page 55 and 56: 2. Open the access flap, then turn
Page 57 and 58: (This logs you on to FileStore in m
Page 59 and 60: 3. Turn FileStore on. 4. Select the
Page 61 and 62: 7. Log off by typing: *BYE Final st
Page 63: If there are already printers on th
Page 66 and 67: to 254, otherwise it should be set
Page 68 and 69: Bad attribute A user has made a mis
Page 70 and 71: FS error 29 Someone has managed to
Page 72 and 73: One of the discs is badly corrupted
Page 74 and 75:
the *CAT command or NETMGR task's T
Page 76 and 77:
If you have more than one FileStore
Page 79 and 80:
Appendix 3: COMMAND SUMMARIES Some
Page 81:
Maintenance mode To use the mainten
Page 84 and 85:
log on the process of selecting a F
Page 86 and 87:
80 Appendix 5: ECONET SYSTEM RECORD
Page 89 and 90:
INDEX $.UTILS.SETT1ME 34 Backup —
Page 91 and 92:
Maintenance tasks 9-10 Role of mana
Page 96:
Acorn Computers Limited Fulbourn Ro
show all

Acorn Communicator Filestore Manager's Guide

Create successful ePaper yourself

Delete template?

Save as template?