Acorn Communicator Filestore Manager's Guide

3 MANAGEMENT FACILITIES:
MAKING CHANGES
Changing the For security reasons, you should regularly change the id that you need to use
FileStore when logging on to FileStore in maintenance mode:
maintenance id 1. Select maintenance mode (see Selecting maintenance mode).
2. Type:
*FSUSER name I I
where name is the new id.
Changing the To change the FileStore station number (for example, because it clashes with
FileStore number another station or FileStore being added to the Econet):
1. Select maintenance mode (see Selecting maintenance mode).
2. Type:
*FSSTN n I
where n is the new station id, in the range 1-254. (You should use
numbers above 200 to avoid clashing with Communicator station
numbers.)
3. To return FileStore to user mode, enter the following:
*FSSTN n (to set station number)
*FS n (to attach to that station)
*FSMODE U (to return to user mode)
where n is the new station number.
Changing the To change the printer type that a user must set (using Configure) to use the
FileStore printer printer connected to FileStore:
type 1. FileStore must be running normally (ie, not in maintenance mode).
2. Type:
*PRNAME name MI
where name is the new printer type.
3 MANAGEMENT FACILITIES: MAKING CHANGES 33