3. - Fagor Automation
3. - Fagor Automation
3. - Fagor Automation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Operating manual<br />
7.<br />
UTILITIES<br />
Accessing the programs without using the explorer<br />
CNC 8035<br />
·T· MODEL<br />
(SOFT V16.3X)<br />
·140·<br />
7.1.5 Protections<br />
To prevent certain programs from being manipulated and restrict access to the operator to certain<br />
CNC commands.<br />
User permissions<br />
Lets the operator see those CNC programs that have been created by the operator and sets their<br />
attributes.<br />
To modify the attributes of a program, proceed as follows:<br />
1. Press the [USER PERMISSION] softkey.<br />
2. Indicate the program number.<br />
If it is in another directory, press the corresponding softkey.<br />
Select the program with the arrow keys or key in its number and press [ENTER].<br />
<strong>3.</strong> Press the following softkeys<br />
F2 to change the (H) attribute program visible (not hidden)<br />
F3 to change the (M) attribute modifiable program<br />
F4 to change the (X) attribute executable program<br />
4. Press the [ENTER] key.<br />
OEM Permission<br />
Lets see all the programs stored at the CNC whether they are created by the OEM or by the operator<br />
and set their attributes.<br />
To modify the attributes of a program, proceed as follows:<br />
1. Press the "OEM PERMISSION" softkey.<br />
2. Indicate the program number.<br />
If it is in another directory, press the corresponding softkey.<br />
Select the program with the arrow keys or key in its number and press [ENTER].<br />
<strong>3.</strong> Press the following softkeys<br />
F1 to change the (O) attribute OEM program<br />
F2 to change the (H) attribute program visible (not hidden)<br />
F3 to change the (M) attribute modifiable program<br />
F4 to change the (X) attribute executable program<br />
4. Press the [ENTER] key.
Change language