3. - Fagor Automation

3.5.4 Graphic parameters
This function can be used any time, even during part program execution or simulation:
With this function it is possible to modify the simulation speed and the colors used to draw the tool
paths.
The modifications made to any parameter are immediately assumed by the CNC and can be made
during the execution or simulation of the part program.
The softkey options displayed by the CNC are:
SIMULATION SPEED
With this option it is possible to modify the feedrate percentage used by the CNC to execute the part
programs in the simulation modes. The selected value will be kept until modified by another value
or resetting the CNC.
The CNC will display a window at the top right-hand side of the screen indicating the current % of
simulation speed.
That value will be modified with the [] [] keys Once the desired value is selected, press [ENTER]
to validate the new value. Press [ESC] to quit this function without making any changes to this field.
It is also possible to change the simulation speed while it is redrawing after a zoom. This lets you
check the machining of a particular operation.
PATH COLORS
This option is used to change the colors used in the graphic representation. They can only be used
in line graphics XZ. There are the following parameters:
The color to draw the rapid traverse.
The color to draw the theoretical path.
The color to draw the compensated path.
The color to draw the threading.
In order to re-define the display area, the CNC will show, to the right of the screen, several windows
indicating the currently selected colors.
Among the various colors to choose from, there is a black or "transparent" one. If this one is chosen
for a particular path, this path will not be displayed on the screen.
Use the [] [] keys to select the window and once selected, modify it using the [] [] keys.
Once the desired colors have been selected, press [ENTER] to validate the new choices or ESC
to ignore the changes and leave this function with the original values intact. Press [ESC] to quit this
function without making any changes to this field.
Operating manual
EXECUTE / SIMULATE
Graphics 3.
CNC 8035
·T· MODEL
(SOFT V16.3X)
·77·