3. - Fagor Automation

Operating manual
9.
PLC
Monitoring
CNC 8035
·T· MODEL
(SOFT V16.3X)
·162·
TEN 1/256 = 0/1
Alters the status (0/1) of the enable input of the indicated timer.
For example: TEN12 = 1, sets the enable input of timer T12 to 1.
TRS 1/256 = 0/1
Alters the status (0/1) of the reset input of the indicated timer.
For example: TRS2 = 0 sets the reset input of timer T2 to 0.
TGn 1/256 n = 0/1
Alters the status (0/1) of the trigger input "TGn" of the indicated timer (1 thru 256) assigning the
desired time constant (n) to it.
For example: TG1 22 1000 sets the trigger input 1 of timer T22 to one and it assigns a time
constant of 1000 (10 seconds).
CUP 1/256 = 0/1
Alters the status (0/1) of the UP count input of the indicated counter.
For example: CUP 33 = 0 sets the status of the UP input of counter C33 to 0.
CDW 1/256 = 0/1
Alters the status (0/1) of the DOWN count input (DW) of the indicated counter.
For example: CDW 32 = 1 sets the status of the UP input of counter C32 to 1.
CEN 1/256 = 0/1
Alters the status (0/1) of the enable input of the indicated counter.
For example: CEN 12 = 0, sets the enable input of counter 12 to 0.
CPR 1/256 n = 0/1
Alters the status (0/1) of the preset input of the indicated counter (1 thru 256). The counter will
be preset with the value "n" if an up flank is produced with this instruction.
For example: CPR 10 1000 = 1sets the status of the preset input of counter C10 to 1. On the
other hand, if the state of this input has changed (it had to be 0 before), the counter will be preset
to a value of 1000.
C 1/256 = n
Presets the count of the indicated counter to the "n" value.
For example: C42 = 1200 sets the count of counter C42 to 1200.
B 0/31 R 1/559 = 0/1
Changes the status (0/1) of the indicated bit (0/31) of the indicated register (1/559).
For example: B5 R200 = 0 sets Bit 5 of register R200 to 0.
R 1/559 = n
Assigns the (n) value to the indicated register.
For example: R 303 = 1200 assigns the value of 1200 to register R303.
R 1/559.1/559 = n
Assigns the (n) value to the indicated register group.
For example: R234.236 = 120 assigns the value of 120 to registers R234, R235 and R236.