3. - Fagor Automation
3. - Fagor Automation
3. - Fagor Automation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
9.3 Monitoring<br />
With this option it is possible to display the PLC program and analyze the status of the different PLC<br />
resources and variables.<br />
Once this option has been selected, the CNC will show the source program that corresponds to the<br />
executable program (object) even when that program (source) has been deleted or modified at the<br />
CNC. The CNC will also display all the variable consultations at logic level 1 (including those not<br />
being executed) and the actions whose conditions are met.<br />
To display the program from a specific line on, press the "L" key followed by that line number. Press<br />
[ENTER] once the line number has been correctly "typed in".<br />
It is possible to move the cursor line by line using the [] [] keys or page by page using the Pageup<br />
and Page-down keys.<br />
The various monitoring options available are described next.<br />
Once any of those options has been selected, the user can move the cursor over this line by means<br />
of the [] [] keys. Also, with the [] key, the cursor may be placed over the first character of the<br />
editing window and, with the [] key over the last character.<br />
Modify the status of the resources<br />
The CNC has the following instructions to modify the status of the different PLC resources.<br />
It must be borne in mind that when referring to a single resource, it is possible to do it using its<br />
corresponding mnemonic. For example, /STOP=1 is interpreted by the CNC as M5001=1.<br />
I 1/256 = 0/1<br />
Alters the status (0/1) of the indicated input.<br />
For example: I120 = 0, sets input I120 to 0.<br />
I 1/256.1/256 = 0/1<br />
Alters the status (0/1) of a the indicated group of inputs.<br />
For example: I100.103 = 1, sets inputs I101, I102 and I103 to 1.<br />
O 1/256 = 0/1<br />
Alters the status (0/1) of the indicated output.<br />
For example: O20 = 0, sets output O20 to 0.<br />
O 1/256.1/256 = 0/1<br />
Alters the status (0/1) of the indicated group of outputs.<br />
For example: O22.25= 1 sets outputs O22 thru O25 to 1.<br />
M 1/5957 = 0/1<br />
Alters the status (0/1) of the indicated mark.<br />
For example: M330 = 0 sets Mark M330 to 0.<br />
M 1/5957.1/5957 = 0/1<br />
Alters the status (0/1) of the indicated group of marks.<br />
For example: M400.403=1 sets marks M400 thru M403 to 1.<br />
Operating manual<br />
PLC<br />
Monitoring 9.<br />
CNC 8035<br />
·T· MODEL<br />
(SOFT V16.3X)<br />
·161·