3. - Fagor Automation

Operating manual
12.
DIAGNOSIS
Configuration
CNC 8035
·T· MODEL
(SOFT V16.3X)
·214·
12.1 Configuration
This option shows the current system configuration. Once this option has been chosen, two new
softkeys will appear in order to select the hardware configuration or the software configuration of
the system.
Hardware configuration.
This option displays the following information:
Central Unit (CPU) configuration.
It indicates the current configuration of the CNC’s central unit: Power supply, boards, video, etc.
CNC RESOURCES
It indicates, in Kb, the size of the user RAM memory, of the system and the memory space of the
"KeyCF".
PLC RESOURCES
It indicates whether the PLC is integrated into the CPU-CNC and the number of inputs and outputs,
local and remote.
LCD ADJUSTMENT (softkey available with monochrome LCD monitors)
Pressing this softkey shows new softkeys for adjusting the brightness/contrast over the adjustment
screen.
The [+] and [-] softkeys may be used to adjust the brightness/contrast.
Pressing the [RESTORE] softkey restores the previous values.
Pressing the [SAVE] softkey assumes the new values.
Software configuration
This option shows:
The available software options.
The software version installed.
The id codes of the unit. They are only to be used by the Service Department.
The softkey to update the version.
The "CODE VALIDATION" softkey must be used after consulting with the Service Department when
wishing to implement more software features.