3. - Fagor Automation
3. - Fagor Automation
3. - Fagor Automation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Operating manual<br />
<strong>3.</strong><br />
EXECUTE / SIMULATE<br />
Block search. Switching from simulation to execution<br />
CNC 8035<br />
·T· MODEL<br />
(SOFT V16.3X)<br />
·52·<br />
<strong>3.</strong>1 Block search. Switching from simulation to execution<br />
This feature solves a situation that occurred when interrupting a program that was being executed<br />
before it ended. The program may have been interrupted due to a "STOP-RESET", and emergency,<br />
a PLC/CNC error or because the CNC was turned off while executing a program or in a temporary<br />
stop.<br />
The CNC remembers the program block at the time of the interruption that did not allow executing<br />
it completely.<br />
The home search permits restoring the history of a program up to a particular block in such way<br />
that when resumed, it executes the rest of the program with the same conditions as it would if it were<br />
executed from the beginning.<br />
Example: A part machining process is interrupted at any time. The block search may be used for<br />
positioning the tool in the same place it was just when the program was interrupted and in the same<br />
conditions.<br />
Block search is executed from the execution mode using a menu driven operational process. The<br />
program execution will resume once the block search is done.<br />
To access the block search, press the softkey of the softkey menu of the<br />
execution window.
Change language