3. - Fagor Automation

Operating manual
7.
UTILITIES
Accessing the programs using the explorer
CNC 8035
·T· MODEL
(SOFT V16.3X)
·144·
By default, the programs will appeared sorted by number in ascending order and the PLC files will
be at the end: errors, messages and programs.
They can also be sorted by comment, date/hour and size, both in ascending or descending order
using the softkey The options displayed are:
By number [N]
By comment
By size
By date
The bottom of the screen shows how much memory is available in each device (unit) and how many
programs are currently selected as well as their total size.
Hidden user files can also be shown using the USERPSW password in the window.
To display all the files, enter the password OEMPSW.
Program handling
A program is considered to be selected on the file list of the right panel when the cursor is on i. It
is shown on the screen with horizontal stripe.
The keys for moving the cursor are:
Use the number keys of the CNC to select the program with the desired number. If there is no program
with that number and the programs are sorted by number, the cursor will select the program with
the nearest lower number.
The operations that may be carried out on the programs displayed by the explorer at the time are:
Rename:
F7 - Cursor movement inside the right/left panels of the explorer.
Up/down arrow keys.
Folder expand/shrink keys of the left panel of the explorer.
SHIFT + Move the cursor to the first program.
SHIFT + Move the cursor to the last program.
To rename the selected program as long as it is a modifiable program. After modified, its date/
time will change.
To rename a program, select it first in the right panel and after pressing the softkey,
>number< option displays the window with the new text frame "new number" where
the new name can be written.
No program may be renamed in DNC 1/2/E.
Modify comment:
To rename the comment of the selected program as long as it is a modifiable program. The
comment must not exceed 20 characters. After modified, its date/time will change.
To change the comment of a program, first select it in the right panel and after pressing the
softkey >comment< option, it shows the text box "new comment" where the new
comment may be written.
No comment of a program may be renamed in DNC 1/2/E.