4 - Fagor Automation
4 - Fagor Automation
4 - Fagor Automation
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Canned cycles (·M· model)<br />
4.6 Tapping.<br />
Geometric parameters:<br />
X, Y Machining point.<br />
Z Part surface coordinate.<br />
Zs Safety plane coordinate.<br />
Dp Part surface approach distance.<br />
The editor will only show this data if the user has configured the editor to allow it. If this option<br />
is not enabled, the cycle assumes an approach distance of 1 mm.<br />
P Total depth.<br />
Kf Feedrate factor for the exit.<br />
Rigid tapping allows a rapid exit from the tap maintaining always the synchronism between the<br />
feedrate and the speed. The withdrawal feedrate is multiplied by this factor (Kf) and the speed<br />
adapts to the new feedrate.<br />
Type of tapping (icon).<br />
Machining parameters:<br />
F Feedrate.<br />
Tapping with a clutch.<br />
Rigid tapping.<br />
S Spindle speed.<br />
T Tool.<br />
D Tool offset.<br />
t Dwell at the bottom, in seconds.<br />
Spindle turning direction (icon).<br />
Clockwise.<br />
Counterclockwise.<br />
Type of feedrate (icon).<br />
In mm/min or (inch/min)<br />
In mm/turn.<br />
4.<br />
CANNED CYCLES OF THE EDITOR<br />
Tapping.<br />
CNC 8065<br />
(REF: 1209)<br />
·107·