4 - Fagor Automation
4 - Fagor Automation
4 - Fagor Automation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
CANNED CYCLES OF THE EDITOR<br />
4.1 Canned cycles available in the editor.<br />
4<br />
The machining cycles integrated into the cycle editor are grouped as follows. When pressing<br />
one of these softkeys, the editor shows the cycle of that group used last. When pressing the<br />
same softkey again, the menu shows all the cycles of the group.<br />
Z axis machining.<br />
Center punching, drilling, deep hole drilling, bore milling, tapping, thread<br />
milling, reaming, boring, boring with spindle orientation.<br />
Pockets / Bosses.<br />
Simple rectangular pocket, rectangular pocket with rounding, circular<br />
pocket and pre-emptied circular pocket, rectangular boss and circular<br />
boss.<br />
2D/3D profile pockets.<br />
2D profile pocket and 3D profile pocket with islands.<br />
Roughing.<br />
Point-to-point profile milling, free profile milling, surface milling and slot<br />
milling.<br />
Multiple machining.<br />
Points in line, points in arc, points in a rectangular pattern, points in a grid<br />
pattern, points in a random pattern (several points defined by the user).<br />
Multiple machining may be associated with canned cycles so it can be<br />
repeated in several points.<br />
CNC 8065<br />
(REF: 1209)<br />
·91·