4 - Fagor Automation

Canned cycles (·M· model)
4.25 Multiple machining in rectangular pattern.
Definition format (icon).
There are 3 different ways to define the machining operation.
To select the desired one, place the cursor on the icon and press the space bar.
The cycle assumes the lower left point as the starting point. If it is not, define with the proper
sign the distances between holes lx and ly.
The number of machining operations "N" must also include the one for the cycle defining
point.
Programming example:
The canned cycle defined at point X25, Y25 is to be repeated at the rest of the points.
(25,75)
(25,25)
We now show the 3 possible ways to define it.
(100,75)
(100,25)
1) Lengths in X, Y Lx 75, Ly 50
Number of machining operations in X and Y Nx 4, Ny 3
Rotation angle α 0
Angle between paths β 90
2) Number of machining operations in X and Y Nx 4, Ny 3
Distance between machining operations in X and Y Ix 25, Iy 25
Rotation angle α 0
Angle between paths β 90
3) Lengths in X, Y Lx 75, Ly 50
Distance between machining operations in X and Y Ix 25, Iy 25
Rotation angle α 0
Angle between paths β 90
4.
CANNED CYCLES OF THE EDITOR
Multiple machining in rectangular pattern.
CNC 8065
(REF: 1209)
·189·