4 - Fagor Automation

Canned cycles (·M· model)
4.27 Random multiple machining.
The starting point is the cycle defining point.
The rest of the points (P2) to (P12) must be defined in the area for multiple machining.
When not using all the points, define the first unused point with the same coordinates as those
of the last point of the profile.
Programming example:
The canned cycle defined at point X25, Y25 is to be repeated at the rest of the points.
75
50
25
(P6) (P7)
(P1) (P2) (P3)
25
(P5)
The canned cycle is defined at point (P1) X25, Y25
(P4)
The rest of the points (P2) to (P7) must be defined in the area for multiple machining.
Since there are only 7 points, you must define (P8) = (P7).
(P2) X 50 Y 25
(P3) X 100 Y 25
(P4) X 75 Y 50
(P5) X 50 Y 50
(P6) X 25 Y 75
(P7) X 100 Y 75
(P8) X 100 Y 75
50
75
100
4.
CANNED CYCLES OF THE EDITOR
Random multiple machining.
CNC 8065
(REF: 1209)
·191·