4 - Fagor Automation
4 - Fagor Automation
4 - Fagor Automation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Canned cycles (·M· model)<br />
I Penetration step.<br />
If programmed with a positive sign (I+), the cycle recalculates the step so all the<br />
penetrations are identical with the same value as or smaller than the one programmed.<br />
If programmed with a negative sign (I-), the pocket is machined with the given pass (step)<br />
except the last pass that machines the rest.<br />
In either case, the cycle limits the step to the cutting length assigned to the tool in the tool table.<br />
Fz Penetration feedrate.<br />
F Surface milling feedrate.<br />
S Spindle speed.<br />
T Tool.<br />
D Tool offset.<br />
Spindle turning direction (icon).<br />
Clockwise.<br />
Counterclockwise.<br />
Machining direction (icon).<br />
Clockwise.<br />
Counterclockwise.<br />
Programming of M functions.<br />
Activating or deactivating the execution of M functions before machining. The cycle allows<br />
editing up to 4 M functions. To execute only some of them, define them first and leave the<br />
rest of the data unprogrammed.<br />
The editor will only show this option if the user has configured the editor to allow<br />
programming M functions.<br />
4.<br />
CANNED CYCLES OF THE EDITOR<br />
Simple rectangular pocket.<br />
CNC 8065<br />
(REF: 1209)<br />
·121·