4 - Fagor Automation
4 - Fagor Automation
4 - Fagor Automation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
4.<br />
CANNED CYCLES OF THE EDITOR<br />
CNC 8065<br />
(REF: 1209)<br />
·124·<br />
Rectangular pocket with rounding.<br />
4.12 Rectangular pocket with rounding.<br />
Canned cycles (·M· model)<br />
The way the roughing and finishing blocks of this cycle are joined will be the one previously<br />
set by the user with the instructions #HSC, G5, G50 or G7. We recommend to use #HSC<br />
or G5 controlling the shape of the corner with the instruction #ROUNDPAR.<br />
Geometric parameters:<br />
X, Y Coordinates of the starting point of the pocket.<br />
Starting point of the pocket (icon).<br />
Starting point at one corner of the pocket.<br />
Starting point at the center of the pocket.<br />
L, H Pocket dimensions.<br />
When the starting point of the pocket is one of its corners, the sign indicates the<br />
orientation with respect to the XY point.<br />
Z Part surface coordinate.<br />
Zs Safety plane coordinate.<br />
P Total depth.<br />
α Angle, in degrees, between the pocket and the abscissa axis. The turn is carried out on the<br />
defined corner, X,Y point.