4 - Fagor Automation
4 - Fagor Automation
4 - Fagor Automation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
4.<br />
CANNED CYCLES OF THE EDITOR<br />
CNC 8065<br />
(REF: 1209)<br />
·136·<br />
Pre-emptied circular pocket.<br />
F Surface and side milling feedrate.<br />
S Spindle speed.<br />
T Finishing tool.<br />
If programmed T=0, there is no finishing.<br />
D Tool offset.<br />
Spindle turning direction (icon).<br />
Clockwise.<br />
Machining direction (icon).<br />
Programming of M functions.<br />
Next tool.<br />
Counterclockwise.<br />
Clockwise.<br />
Counterclockwise.<br />
Canned cycles (·M· model)<br />
Activating or deactivating the execution of M functions before machining. The cycle allows<br />
editing up to 4 M functions. To execute only some of them, define them first and leave the<br />
rest of the data unprogrammed.<br />
The editor will only show this option if the user has configured the editor to allow<br />
programming M functions.<br />
Activating or deactivating the preparation of the next tool.<br />
The editor will only show this option if the user has configured the editor to allow<br />
programming the next tool.