4 - Fagor Automation
4 - Fagor Automation
4 - Fagor Automation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Canned cycles (·M· model)<br />
4.24 Multiple machining in arc pattern.<br />
Definition format (icon).<br />
There are 9 different ways to define the machining operation.<br />
To select the desired one, place the cursor on the icon and press the space bar.<br />
The movement in arc is made counterclockwise. To do it clockwise, define the angular<br />
distance between machining operations β with a negative sign.<br />
The number of machining operations "N" must also include the one for the cycle defining<br />
point.<br />
Programming example:<br />
The canned cycle defined at point X90, Y50 is to be repeated at the rest of the points.<br />
We now show the 9 possible ways to define it.<br />
1) Center coordinates Xa 50, Ya 50<br />
Total number of machining operations N 7<br />
Angle of the end point τ 270<br />
2) Center coordinates Xa 50, Ya 50<br />
Total number of machining operations N 7<br />
Angular distance between machining operations β 45<br />
3) Radius R 40<br />
Total number of machining operations N 7<br />
Angle of the starting point α 0<br />
Angle of the end point τ 270<br />
4) Radius R 40<br />
Total number of machining operations N 7<br />
Angle of the starting point α 0<br />
Angular distance between machining operations β 45<br />
5) Center coordinates Xa 50, Ya 50<br />
Angle of the end point τ 270<br />
Angular distance between machining operations β 45<br />
45 o<br />
(50,50)<br />
6) Radius R 40<br />
Angle of the starting point α 0<br />
Angle of the end point τ 270<br />
Angular distance between machining operations β 45<br />
40<br />
(50,10)<br />
(90,50)<br />
4.<br />
CANNED CYCLES OF THE EDITOR<br />
Multiple machining in arc pattern.<br />
CNC 8065<br />
(REF: 1209)<br />
·187·