International Post Guide - Australia Post

26 International Post Guide
Layout of the address-side of an IRP article
The diagram shows the layout of the address-side of an IRP article. All dimensions are in
millimetres. Permit holders must strictly observe this layout to prevent assessment overseas as
underpaid mail. The shaded 15 mm bands in the diagram indicate those areas that must contain no
printing. Do not duplicate the shading.
3
September 2007
Y AIR MAIL
IBRS/CCRI NO.
B
Delivery Address:
PO Box 6422
ST KILDA RD CENTRAL VIC 3004
AUSTRALIA
REPLY PAID / REPONSE PAYEE
AUSTRALIA / AUSTRALIE
1312022222121130202111000001333333333330000303020313
The Business Connection
Reply Paid 6422
ST KILDA RD CENTRAL VIC 3004
AUSTRALIA
NE PAS AFFRANCHIR
NO STAMP REQUIRED
15 15
1 Postage zone
The postage zone contains the NE PAS AFFRANCHIR/NO STAMP REQUIRED indicator illustrated.
It is 5 mm from both the top and right-hand edges of the article.
40
NE PAS AFFRANCHIR
NO STAMP REQUIRED
30
2 Address zone
The address zone is at least 15 mm from both the right-hand edge and the bottom of the article. The
IRP logo is 5 mm from the top of the address zone. It has the dimensions illustrated.
80
REPLY PAID / REPONSE PAYEE
AUSTRALIA / AUSTRALIE
14 20
The logo wording is in BOLD UPPER CASE characters not less than 4 mm in height.
Format of address
The name and address, as specified in the permit, appears below the logo and parallel to it.
The layout and typeface of the address is that specified in the Letter Post Guide and must include
the barcode. The second last line of the address contains the town, state abbreviation and postcode
separated by no more than two spaces with no punctuation. The last line of the address is
AUSTRALIA in UPPER CASE letters with no other words or punctuation.
5
5
5
15
1
2