Sampling Guide for Air Contaminants in the Workplace - Irsst

More documents

Recommendations

Info

ROHS Substances table 60 ROHS Name CAS TWAEV STEV Ceiling (mg/m³) Notes Sampling Device Flow L/min Volume TWAEV STEV (L) Principle MRV µg CVa (%) # meth. Remarks bis (Chloromethyl) ether 542-88-1 0,0047 C1 RP EM Two glass fritted impingers containing a solution of methanol and 2,4,6- trichlorophenol. 0,5 50 GC-ECD OSHA 10 Contact the IRSST before sampling. 1-Chloro-1-nitropropane 600-25-9 10 Chromosorb-108 tube 0,2 12 GC-FID NIOSH S211 Contact the IRSST before sampling. Chloropentafluoroethane 76-15-3 6320 Activated charcoal tube 100/50 mg 0,05 2,5 GC-FID OSHA IMISC135 Contact the IRSST before sampling. Chloropicrin 76-06-2 0,67 Two XAD-4 80/40 mg tubes in series 0,2 5 GC-ECD OSHA PV2103 Contact the IRSST before sampling. ß-Chloroprene 126-99-8 36 Pc Activated charcoal tube 100/50 mg 0,01- 8 GC-FID NIOSH 1002 0,1 Contact the IRSST before sampling. 3-Chloropropene 107-05-1 3 6 Activated charcoal tube 100/50 mg 0,01-1 100 GC-FID 15 NIOSH 1000 Contact the IRSST before sampling. 2-chloropropionic acid 598-78-7 0,44 Pc Silica gel tube 100/50 mg 0,05- 100 IC-CD NIOSH 2008 0,2 Contact the IRSST before sampling. Stable for at least 7 days at 25°C and 32 days at 4°C o-Chlorostyrene 2039-87-4 283 425 Activated charcoal tube 100/50 mg 0,01- 0,2 20 3 GC-FID NIOSH 1003 Contact the IRSST before sampling. NIOSH method 1003 is for halogenated hydrocarbons, which does not specifically include o-chlorostyrene. o-Chlorotoluene 95-49-8 259 Activated charcoal tube 100/50 mg 0,01- 10 0,2 3 GC-FID NIOSH 1003 Contact the IRSST before sampling. NIOSH method 1003 is for halogenated hydrocarbons, which does not specifically include o-chlorotoluene. Chlorpyrifos 2921-88-2 0,2 Pc OVS tube with XAD-2 and glass fiber filter 0,2-1 240 GC-FPD NIOSH 5600 Contact the IRSST before sampling. Some phosphates may cause interference during the analysis.
ROHS Substances table 61 ROHS Name CAS TWAEV STEV Ceiling (mg/m³) Notes Sampling Device Flow L/min Volume TWAEV STEV (L) Principle MRV µg CVa (%) # meth. Remarks Chromium (metal) Chromium (III) compounds (as Cr) 7440-47-3 0,5 Mixed cellulose ester filter, 0.8µm, 25 and 1,5 180 ICP-MS 1 3,75 IRSST 362 37 mm. 905 MCE filter-37 915 MCE filter-25 0,5 Mixed cellulose ester filter, 0.8µm, 25 and 1,5 180 ICP-MS 1 3,75 IRSST 362 37 mm. 905 MCE filter-37 915 MCE filter-25 Cassettes 913 or 916, whose filters are preweighed, can also be used. For surface wipe sampling, contact Laboratory Customer Service. The analytical results are expressed as total chromium. Cassettes 913 or 916, whose filters are preweighed, can also be used. For surface wipe sampling, contact Laboratory Customer Service. The analytical results are expressed as total chromium. Chromium VI, water insoluble inorganic compounds (as Cr) 0,01 C1 RP EM S PALL CA28149-306 vinyl/acrylic copolymer filter 926 Vinyl/acrylic copolymer filter 1,5 à 4 360 IC-VIS 0,04 4,4 IRSST 365 For surface wipe sampling, contact Laboratory Customer Service. The analytical results are expressed as total water-insoluble chromium VI. Surface tests for chromates can be carried out, and the required equipment (kit #2625) is available at the IRSST. See communiqué 2008-06 on our Web site. Analysis time of 8 days for welding fumes and 10 days for the other processes following the sampling date. Ship all samples by rapid courier within a period not exceeding 24 hours after sampling. Any substance that produces a response on the detector at 540 nm and that has a retention time similar to Cr VI is a potential interference. Chromium VI, water soluble inorganic compounds (as Cr) 0,05 C1 RP EM S PALL CA28149-306 vinyl/acrylic copolymer filter 926 Vinyl/acrylic copolymer filter 1,5 à 4 360 IC-VIS 0,04 2,29 IRSST 365 For surface wipe sampling, refer to Appendix 3 of the sampling guide. The analytical results are expressed as total water-soluble chromium VI. Surface tests for chromates can be carried out, and the required equipment (kit #2625) is available at the IRSST. See communiqué 2008-06 on our Web site. Analysis time of 8 days for welding fumes and 10 days for the other processes following the sampling date. Ship all samples by rapid courier within a period not exceeding 24 hours after sampling. Any substance that produces a response on the detector at 540 nm and that has a retention time similar to Cr VI is a potential interference. Chromium VI, water soluble inorganic compounds (as Cr) 0,05 C1 RP EM S Not available (refer to commmuniqué 2012-03) 927 IRSST 365 For chromium VI in an acid aerosol. Chromyl chloride 14977-61-8 0,16 Contact the IRSST before sampling. No supporting reference is suggested for this product.
Page 1 and 2:
Chemical and Biological Hazards Pre
Page 3 and 4:
Chemical and Biological Hazards Pre
Page 5:
IRSST - Sampling Guide for Air Cont
Page 8 and 9:
iv IRSST - Sampling Guide for Air C
Page 10 and 11:
vi IRSST - Sampling Guide for Air C
Page 12 and 13:
2 IRSST - Sampling Guide for Air Co
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
Page 20 and 21: 10 IRSST - Sampling Guide for Air C
Page 52 and 53: ROHS Substances table 42 ROHS Name
Page 120 and 121:
ROHS Substances table 110 ROHS Name
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Substances non regulated from ROHS
Page 146 and 147:
Substances non regulated from ROHS
Page 148 and 149:
138 IRSST - Sampling Guide for Air
Page 150 and 151:
Page 152:
show all

Sampling Guide for Air Contaminants in the Workplace - Irsst

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?