Sampling Guide for Air Contaminants in the Workplace - Irsst

More documents

Recommendations

Info

ROHS Substances table 80 ROHS Name CAS TWAEV STEV Ceiling (mg/m³) Notes Sampling Device Flow L/min Volume TWAEV STEV (L) Principle MRV µg CVa (%) # meth. Remarks Fibres, Natural Mineral Fibres, Attapulgite 12174-11-7 1 f/cc C1 EM Cassette with conductive extension and mixed cellulose ester filter, Environmental Express CS250080 918 MCE filter-25 0,5-16 PCM 400 IRSST 243-1 Open cassette sampling. A flow rate not exceeding 2.5 L/min is recommended for determining an average concentration. Supply at least 2 blanks per series of samples or 10% of sample total, whichever is highest. Send the samples in a cardboard box supplied by the IRSST (#3010). In relatively uncontaminated atmospheres, where the fibre concentration is much lower than 0.1 fibres/mL, use larger sampling volumes (3000 to 10000L) in order to obtain quantifiable densities. The method applies to the counting of all fibres whose refractive index is compatible with the mounting solution. The minimum reported value is 25 fibres/mm². Characterization of the fibres in bulk samples or in deposited dusts is done using method 244-2. An analysis using a transmission electron microscopy (TEM) method may be required for some materials containing fine asbestos fibres, for example floor tiles. Fibres, Natural Mineral Fibres, Erionite C1 PLM IRSST 244-2 The use of this substance is prohibited. Caracterization of fibers in bulk samples or deposited dust is by method 244-2. 66733-21-9 Fibres-Natural Mineral Fibres, Wollastonite 13983-17-0 10 Pt SKC 225-8-01-1 or 225-8-04 polyvinyl 1,5 180 Grav 25 4,9 IRSST 48-1 chloride filter 902 PVC filter-37 914 PVC filter-25 Additional information is available in Info-Labo 91-03. The weight measurement method for dusts is by definition non-specific. Fibres-Natural Mineral Fibres, Wollastonite Fibres, Organic Synthetic Fibres, Carbon and graphite fibres 13983-17-0 5 Pr SKC 225-8-01-1 or 225-8-04 polyvinyl 1,7 180 Grav 25 4,9 IRSST 48-1 chloride filter (nylon) 902 914 PVC filter-37 PVC filter-25 2,75 (GS3) 997 PVC filter-37, 3 parts 10 Pt SKC 225-8-01-1 or 225-8-04 polyvinyl 1,5 180 Grav 25 4,9 IRSST 48-1 chloride filter 902 PVC filter-37 914 PVC filter-25 Additional information is available in Info-Labo 91-03. The weight measurement method for dusts is by definition non-specific. Additional information is available in Info-Labo 91-03. The weight measurement method for dusts is by definition non-specific.
ROHS Substances table 81 ROHS Name CAS TWAEV STEV Ceiling (mg/m³) Notes Sampling Device Flow L/min Volume TWAEV STEV (L) Principle MRV µg CVa (%) # meth. Remarks Fibres, Organic Synthetic Fibres, Carbon and graphite fibres 5 Pr SKC 225-8-01-1 or 225-8-04 polyvinyl 1,7 180 Grav 25 4,9 IRSST 48-1 chloride filter (nylon) 902 914 PVC filter-37 PVC filter-25 2,75 (GS3) 997 PVC filter-37, 3 parts Additional information is available in Info-Labo 91-03. The weight measurement method for dusts is by definition non-specific. Fibres, Organic Synthetic Fibres, Paraaramide fibres (Kevlar®, Twaron®) 1 f/cc Cassette with conductive extension and 0,5-16 400 PCM IRSST 243-1 mixed cellulose ester filter, Environmental Express CS250080 918 MCE filter-25 Open cassette sampling. A flow rate not exceeding 2.5 L/min is recommended for determining an average concentration. Supply at least 2 blanks per series of samples or 10% of sample total, whichever is highest. Send the samples in a cardboard box supplied by the IRSST (#3010). In relatively uncontaminated atmospheres, where the fibre concentration is much lower than 0.1 fibres/mL, use larger sampling volumes (3000 to 10000L) in order to obtain quantifiable densities. The method applies to the counting of all fibres whose refractive index is compatible with the mounting solution. The minimum reported value is 25 fibres/mm². Characterization of the fibres in bulk samples or in deposited dusts is done using method 244-2. An analysis using a transmission electron microscopy (TEM) method may be required for some materials containing fine asbestos fibres, for example floor tiles. Fibres, Organic Synthetic Fibres, Polyolefin fibres 10 Pt SKC 225-8-01-1 or 225-8-04 polyvinyl 1,5 180 Grav 25 4,9 IRSST 48-1 chloride filter 902 PVC filter-37 914 PVC filter-25 Additional information is available in Info-Labo 91-03. The weight measurement method for dusts is by definition non-specific. Fluorides (as F) 2,5 Mixed cellulose ester filter followed by a 1-2 800 SE NIOSH Contact the IRSST before sampling. Recommended volume between 12 and 800 7902 pretreated cellulose pad litres. Fluorine 7782-41-4 0,2 Mixed cellulose ester filter followed by a 1-2 800 SE NIOSH 7902 pretreated cellulose pad Contact the IRSST before sampling. Fonofos 944-22-9 0,1 Pc OVS-2 tube with XAD-2 and glass fiber 0,2-1 240 GC-FPD NIOSH 5600 filter Contact the IRSST before sampling. Some phosphates may cause interference during the analysis.
Page 1 and 2:
Chemical and Biological Hazards Pre
Page 3 and 4:
Chemical and Biological Hazards Pre
Page 5:
IRSST - Sampling Guide for Air Cont
Page 8 and 9:
iv IRSST - Sampling Guide for Air C
Page 10 and 11:
vi IRSST - Sampling Guide for Air C
Page 12 and 13:
2 IRSST - Sampling Guide for Air Co
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
Page 20 and 21:
10 IRSST - Sampling Guide for Air C
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
Page 40 and 41: 30 IRSST - Sampling Guide for Air C
Page 52 and 53: ROHS Substances table 42 ROHS Name
Page 140 and 141:
ROHS Substances table 130 ROHS Name
Page 142 and 143:
ROHS Substances table 132 ROHS Name
Page 144 and 145:
Substances non regulated from ROHS
Page 146 and 147:
Substances non regulated from ROHS
Page 148 and 149:
138 IRSST - Sampling Guide for Air
Page 150 and 151:
Page 152:
show all

Sampling Guide for Air Contaminants in the Workplace - Irsst

Create successful ePaper yourself

Delete template?

Save as template?