5800 Refrigerated Sampler Service Guide - Isco
5800 Refrigerated Sampler Service Guide - Isco
5800 Refrigerated Sampler Service Guide - Isco
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>5800</strong> <strong>Refrigerated</strong> <strong>Sampler</strong> <strong>Service</strong> <strong>Guide</strong><br />
Section 4 CPU and Power Supply<br />
8. From the front interior of the refrigerator, remove the two<br />
Phillips screws holding the fan in place and remove the<br />
fan’s power cable by disconnecting the red (+) and black (-)<br />
wires.<br />
Cable connector<br />
Fan power<br />
cable<br />
Enlarged view of fan<br />
power terminals<br />
Figure 4-10 Remove fan mounting screws and disconnect cable<br />
(view from inside refrigerator)<br />
9. Inserting the screwdriver through the holes in the heater<br />
plate, remove the two Phillips screws from the power supply<br />
back plate and remove the power supply (Figure 4-11).<br />
4-19
Change language