5800 Refrigerated Sampler Service Guide - Isco
5800 Refrigerated Sampler Service Guide - Isco
5800 Refrigerated Sampler Service Guide - Isco
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>5800</strong> <strong>Refrigerated</strong> <strong>Sampler</strong> <strong>Service</strong> <strong>Guide</strong><br />
Section 2 Sample Delivery System<br />
2.8.4 Optical Sensor 1. Slide the optical sensor into place, to position it with the<br />
optical disk between its upper and lower arms. The disk<br />
should never touch the sensor.<br />
2. Attach the sensor and plate with the two self-tapping<br />
mounting screws. Tighten the screws to 10-14 in/lbs.<br />
* mounting<br />
screws (2)<br />
Figure 2-33 Installing the optical sensor<br />
2.8.5 Distributor Parts List Table 2-2 contains a list of distributor components and part<br />
numbers.<br />
Table 2-2 Distributor Parts List<br />
Band Gasket 60-3113-029<br />
Index Disk 69-4703-018<br />
Motor/Pulley Assembly 60-4708-010<br />
Motor Mount Accessory Kit 60-4709-002<br />
Optical Sensor & Harness 69-4704-026<br />
Sensor Accessory Kit 60-4709-001<br />
Distributor Base 60-4703-014<br />
2-26