5800 Refrigerated Sampler Service Guide - Isco
5800 Refrigerated Sampler Service Guide - Isco
5800 Refrigerated Sampler Service Guide - Isco
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Isco</strong> <strong>5800</strong> <strong>Refrigerated</strong> <strong>Sampler</strong> <strong>Service</strong> <strong>Guide</strong><br />
Safety<br />
Electrical Safety<br />
<strong>Isco</strong> <strong>5800</strong> <strong>Refrigerated</strong> <strong>Sampler</strong> <strong>Service</strong> <strong>Guide</strong><br />
Safety<br />
The <strong>Isco</strong> <strong>5800</strong> <strong>Refrigerated</strong> <strong>Sampler</strong> is a “definite purpose”<br />
device, intended for use only with compatible <strong>Isco</strong> equipment.<br />
Except as described in this manual, do not use this product with<br />
any other manufacturers’ equipment, or for any other purpose.<br />
Use for any purpose not described in this manual could cause<br />
personal injury or property damage.<br />
The sampler requires a nominal 115V/60 Hz, or 230V/50Hz AC<br />
power. Refer to the nameplate and ratings label inside the refrigerator<br />
compartment. The power input is through the mains<br />
power cord at the back of the sampler. The sampler is protected<br />
by an internal thermal cut-out. Additionally, the sampler controller<br />
circuitry is protected by an internal fuse.<br />
WARNING<br />
Electrocution hazard. Never manipulate electrical switches<br />
or power connections with wet hands or when your feet are<br />
in contact with water.<br />
WARNING<br />
AC electrical power must meet the applicable electrical<br />
code requirements for your installation and must be<br />
provided with an earth ground connection. If necessary,<br />
consult with a certified electrician to ensure that AC power<br />
is provided in accordance with the local electrical code.<br />
The AC power cord of this device is equipped with a three-prong<br />
grounding plug designed to mate with a grounded power outlet.<br />
Grounding minimizes the possibility of electrical shock.<br />
It is the user’s responsibility to ensure that the AC power source<br />
is properly grounded. If in doubt, have the outlet checked by a<br />
qualified electrician.<br />
If the available AC power outlet only accepts two prongs, or if it<br />
is determined that the outlet is improperly grounded, the outlet<br />
must be replaced by a qualified electrician before attempting to<br />
power this device.<br />
WARNING<br />
If this device’s AC power cord is frayed or otherwise<br />
damaged, discontinue its use immediately. Never modify<br />
the power cord. A replacement power cord is available from<br />
Teledyne <strong>Isco</strong>; see Section 4.6 of this manual for more<br />
information.<br />
i