5800 Refrigerated Sampler Service Guide - Isco
5800 Refrigerated Sampler Service Guide - Isco
5800 Refrigerated Sampler Service Guide - Isco
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>5800</strong> <strong>Refrigerated</strong> <strong>Sampler</strong> <strong>Service</strong> <strong>Guide</strong><br />
Section 3 Refrigeration System<br />
4. Remove the large ferrite bead from the connector end of<br />
the cable (it snaps apart). Retain the ferrite bead for installation<br />
on the replacement cable assembly.<br />
Ferrite Bead<br />
Cable<br />
Connector<br />
Figure 3-2 Ferrite bead on temperature sensor cable<br />
connector end<br />
5. The evaporator sensor is mounted on the sixth coil up on<br />
the evaporator. Cut the ties holding the evaporator sensor<br />
in place and move it out of the frame.<br />
Cable<br />
Ties<br />
Figure 3-3 Removing evaporator temp sensor:<br />
Cut cable ties<br />
3-4
Change language