NPL-352 Manual-09.pdf
NPL-352 Manual-09.pdf
NPL-352 Manual-09.pdf
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
4 Applications<br />
After the measurement to P2 is completed, the<br />
coordinates of the station are calculated.<br />
6. To record the station, press [ENT] or the REC<br />
softkey.<br />
7. To check your measurement, press the DSP<br />
softkey. If you defined the line by entering its<br />
azimuth, HD and VD between P1 and P2 are<br />
displayed.<br />
If you defined the line by entering the P2<br />
coordinates, the difference of HD (dHD) and<br />
VD (dZ) between your measurement data and<br />
input coordinate data are displayed.<br />
8. Enter the station name, the height of<br />
instrument (HI), and a feature code (CD) if<br />
required. The station name defaults to the last<br />
recorded PT + 1, or last recorded ST + 1,<br />
depending on the Split ST setting.<br />
9. Backsight (BS) defaults to the first point (P1).<br />
To change it, highlight the BS field and then<br />
press the Change softkey.<br />
10. To finish the setup and record the station, press<br />
[ENT] in the BS field.<br />
Sample records<br />
CO, Temperature:20C Pressure:1013hPa Prism:0 …<br />
ST,9005, ,265, ,1.2350,150.40300,150.40300<br />
F1,265,1.6040,79.0010,90.30150,89.<strong>352</strong>60,<br />
F1,200,1.4590,50.2300,269.4035,93.50110,<br />
CO, P1-P2 HD=122.0350 VD=0.5600<br />
80 Pulse Laser Station <strong>NPL</strong>-302 Series Instruction <strong>Manual</strong>