NPL-352 Manual-09.pdf

3 Getting Started
Jobs created before version 1.10
The current database version is 1.10. Jobs
prefixed with ? were created in earlier versions of
the database, and cannot be used in version 1.10.
If a job is from an earlier version, you cannot open
it, set it as the control job, or display its job
information. However, you can use the DEL
softkey to delete it.
Jobs created in version 1.02 or earlier are not compatible with version 1.10 or later.
Download all jobs before you update the software that is running on the instrument.
Measuring Distances 3.1
Sighting a prism reflector 31.1
C
Warning – Never look at the sun through the telescope. If you do, you may
damage or lose your eyesight.
For information on how to assemble the prism reflector, see Setting Up the Prism
Reflector, page 22.
Sight the telescope to see crosshairs at the center of the
prism reflector.
Sighting a single prism
58 Pulse Laser Station NPL-302 Series Instruction Manual