NPL-352 Manual-09.pdf

5 Menu Key
If you selected ST, SO, F1, or F2 in the Type field, you do not have to enter a value
in the CD field. Press [ENT] in the PT field to start the search.
If you selected CO, CO(SY), or CO(RDM) in the Type field, you cannot enter a value
in the PT or CD fields. Press [ENT] in the Type field to start the search.
If more than one point matches the search criteria,
the matching points are displayed in a list.
Use [^] or [v] to highlight the point you want to use.
Then press [ENT] to select it.
Detailed data for the selected record appears.
Press the DSP softkey to change the fields shown.
Press [ESC] to return to the list.
If no point matches the specified criteria, an error
screen appears. Press any key to return to the
data screen.
Searching coordinate records
In the XYZ screen, press the Srch softkey to
access the XYZ data search function.
To find a coordinate by name, enter the name in
the PT field and press [ENT] twice.
152 Pulse Laser Station NPL-302 Series Instruction Manual