NPL-352 Manual-09.pdf

Applications 4
You can use an REM measurement to update the height of target. Take a
measurement to the prism, sight the bottom of the prism pole, and press [ENT].
Measuring distance and offset values on the vertical plane 40.1
Baseline
1. To enter the 2-Pt Reference Plane function,
press [6] or select
V-Plane in the Programs menu.
2. Enter two points to define the plane.
– To enter the point by direct measurement,
press the MSR softkey.
When you press the MSR softkey, a temporary
observation screen appears.
3. Press [MSR1] or [MSR2]. The Record PT screen
appears.
Pulse Laser Station NPL-302 Series Instruction Manual 99