NPL-352 Manual-09.pdf

Getting Started 3
When you select a point from the list, its
coordinates are displayed and a beep sounds.
Recording an instant measurement
You can also input a point by recording an instant
measurement. To do this, press the MSR softkey.
An observation screen appears.
Press [MSR1] or [MSR2] to start a measurement. To
change the height of the target, press the HT
softkey.
To go to the point recording screen when you have
finished the measurement, press [ENT].
Enter the point or code name. Press [ENT].
When you move the cursor to a field, the current
or default value appears in inverted text (this is
the default “Replace All” input mode).
Press [>] to change the input mode to Overwrite
mode and highlight the first character. Press [