NPL-352 Manual-09.pdf

Error Messages 10
C
Caution
– Selecting Continue does not resume the last ST record. You
should only use the Continue option if you are sure that the previous ST
coordinates and the current HA orientation are correct. Otherwise, records in
the Stakeout function may not be correct.
Station Setup 10.13
Calc ST Failed Need additional PT 1013.1
Calculating ST failed in resection. This message may appear after you have deleted
a point the View shots screen.
Press any key to return to the PT input screen. Take another shot to calculate the ST
coordinate.
Same Coordinate 1013.2
The input PT or coordinate is identical to the current station in STN/1:Known, or
the same coordinate or point name/number is found in Resection.
Press any key to return to the PT input screen. Then use a different PT.
Space LOW 1013.3
There is not enough space to record a station when you start any of the Station
Setup functions.
To ... Press ...
return to the BMS press [ESC] or the Abrt softkey. Use the DEL
softkey in Job Manager to delete old jobs.
continue
press [ENT] or the OK softkey. You may not be able
to record the whole process.
XY-coordinate is required 1013.4
The input point for ST/BS does not have N/E coordinates.
Press any key to return to the PT input screen. Then use a PT that has N/E
coordinates.
Pulse Laser Station NPL-302 Series Instruction Manual 213