NPL-352 Manual-09.pdf

Getting Started 3
Setting the default point name
To change the default point name, press [HOT] to
display the HOT menu. Then press [5], or select
Default PT and press [ENT].
This function is available from any observation
screen.
Modify the default point name for the next record.
Press [ENT] to confirm the new default point name.
The new point name is appears as the default PT
name on the input screen.
Bubble indicator 30.3
The bubble indicator is automatically displayed if the instrument goes out of level
while the compensators are turned on.
To display the bubble indicator in an observation screen, press .
The NPL-362/352 has two-axis level
compensation. To turn the leveling compensators
on or off, press []. When the leveling
compensators are turned off, the text OFF appears
on the screen.
If the instrument is more than ±3'30" out of level,
the text OVER appears on the screen.
To return to the observation screen, press [ESC] or
[ENT] .
The NPL-332 has vertical axis adjustment only.
To turn the leveling compensators on or off, press
[].
The current setting of leveling compensators is indicated by header characters (:, #,
:, and #) after field labels (such as HA, VA, SD, and HD) in observation screens. For
more information, see Header characters, page 40.
Pulse Laser Station NPL-302 Series Instruction Manual 45