NPL-352 Manual-09.pdf
NPL-352 Manual-09.pdf
NPL-352 Manual-09.pdf
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
10 Error Messages<br />
DELETE Stn-XYZ 104.4<br />
You have tried to delete a coordinate record that the current ST or BS refers to. You<br />
must confirm that you want to delete a coordinate record that the current ST or BS<br />
refers to.<br />
To ... Press ...<br />
delete XYZ<br />
the DEL softkey<br />
return to the previous screen without deleting XYZ [ESC] or the Abrt softkey<br />
External Communication 10.5<br />
If an error is detected when receiving a command from an external communication<br />
line, the process aborts and the error message appears for a few seconds.<br />
REMOTE ERROR 105.1<br />
There is an error in a parameter in the external command. The command line<br />
appears on the bottom line.<br />
Contact the company that supplied your data recorder or external communications<br />
software and report the command that appears on the bottom line.<br />
Job Manager 10.6<br />
Cannot Assign 106.1<br />
You have tried to set the current job as the control file.<br />
Press any key to return to the previous screen. Then select a different job.<br />
Can't Create 106.2<br />
There is no space available to create a job or record a point.<br />
Press any key to return to the Job Manager. Then use the DEL softkey to delete old<br />
jobs.<br />
Existing Job 106.3<br />
You have entered an existing job name for a new job.<br />
Press any key and then change the name for the new job.<br />
208 Pulse Laser Station <strong>NPL</strong>-302 Series Instruction <strong>Manual</strong>
Change language