NPL-352 Manual-09.pdf

Applications 4
Measuring distance and offset values on the slope 40.1
P2
(X 2 ,Y 2 ,Z 2 )
b
Target
(X,Y,Z)
P3
(X 3 ,Y 3 ,Z 3 )
Stn
a
P1
(X 1 ,Y 1 ,Z 1 )
1. To enter the 3-Pt Reference Plane function,
press [7] or select
S-Plane in the Programs menu.
2. Enter three points to define the slope plane. To
enter the point by direct measurement, press
the MSR softkey.
If you press [ENT] in a blank field, an input
screen for temporary coordinates appears.
These coordinates will not be stored.
When you have entered the temporary
coordinates, appears
instead of the PT name.
Pulse Laser Station NPL-302 Series Instruction Manual 101