NPL-352 Manual-09.pdf

Getting Started 3
To assign a specific function from the sub-menu, press [^] or [v] to highlight the
function. Then press [ENT].
Once you have assigned a function to a [USR] key,
it is called directly whenever you press that [USR]
key in the BMS.
To change the type of data that is assigned to the
[USR] keys in MENU > 1sec-Keys > [USR].
For more information, see [USR] key settings,
page 165.
[DAT] key 30.5
Use the [DAT] key to quickly access data in the current job from observation screens.
When you press [DAT] in the BMS or in
observation screens in functions such as Stakeout,
2Pt RefLine, and Arc RefLine, the assigned data
in the current job appears.
Hold down [DAT] for one second in the BMS or an
observation screen to display the Select Format
screen. Use this screen to change the type of data
that is assigned to [DAT]. Press [1] or select
DAT [MENU] to display the Data menu
whenever you press [DAT].
Pulse Laser Station NPL-302 Series Instruction Manual 47