NPL-352 Manual-09.pdf

5 Menu Key
There are two [MSR] keys:
– To change the settings for the [MSR1] key,
press [1] or select MSR1.
– To change the settings for the [MSR2] key,
press [2] or select MSR2.
Each [MSR] key has five settings.
In the Const and AVE fields, use the numeric keys
to enter values. In the other fields, use [] to
change the settings.
B
Tip – You can also access the settings screen by holding down [MSR1] or
[MSR2] for one second.
[DSP] key settings 51.2
To change the display items in the BMS and in
Stakeout observation screens, press [2] or select
[DSP] in the 1sec-Keys menu.
To move the cursor, use [] , [^], or [v]. To change
the display item, press either the softkey or the
softkey.
To save the changes, press [ENT] at the last line of
or press the Save softkey.
B
Tip – You can also access the DSP settings screen by holding down [DSP] for
one second.
164 Pulse Laser Station NPL-302 Series Instruction Manual