Development of Policy, Legal, and Insitutional Framework for - ppiaf

More documents

Recommendations

Info

Development of Policy, Legal, & Institutional Framework for the PPP Program in Malawi Final Report The information to be provided, as part of the Technical Proposal, shall include amongst others: (i) Design Applicable standards for design, materials, manufacture, mechanical and electrical works, civil and structural works, communications, fire protection, heating and ventilation, operation and maintenance, and all other works to be undertaken to fulfil the requirements of the Model PPA. Such applicable standards will be consistent with an efficient operating life of the Plant of no less than thirty (30) years. Indicative Plant Site layout drawings showing locations of key features of the proposed Plant including buildings, coal and ash handling facilities, water facilities, services, interconnection, access roads, as appropriate. Such locations shall be within the areas designated on the Indicative Plant Site Plan as being available for the particular purposes. The Indicative Plant Site layout drawings shall nominate the location of drainage and effluent discharge points. The location of the 150 kV substation and 150 kV transmission line route shall be shown. The Bidder’s transportation plan for transporting plant, equipment and materials to the Plant Site. (ii) Generating Plant and Auxiliaries Plant shall be brand new, Plant Site civil works including all site utilities and services, raising building platforms, constructing dykes as necessary and constructing effective drainage and dewatering systems to prevent flooding of buildings and plant facilities. The Net Dependable Capacity of the plant in MW at Site Conditions and burning the coal, proposed by the Bidder. The Net Dependable Capacity, as adjusted for differences between ambient conditions and Site Conditions, is guaranteed by the Bidder. Outline design of the Plant’s electrical plant and systems, including redundancy levels to be provided and in particular the mode of connection to PPC Grid System. Outline design of Plant auxiliaries, services and systems including Coal and Ash handling system, cooling water system, lube oil, hydraulic oil, service water, heating and ventilation system, fire detection and protection system and exhaust systems. Related data, with details of equipment redundancy levels, shall be provided. THE INSTITUTE FOR PUBLIC-PRIVATE PARTNERSHIPS 190
Development of Policy, Legal, & Institutional Framework for the PPP Program in Malawi Final Report Details of generating plant including: - Manufacturer, type and model of each Unit, the number of Units - Start-up times, loading rates and other dynamic parameters. - Steam turbine. - AVR, exciters including reactive power control and related equipment. - Auxiliary plant and accessories. (iii) (iv) (v) (vi) Confirmation that the proposed Plant would employ proven technology. Experience reference sheets or similar evidence of proven performance on other projects shall be provided in respect of major plant items. Water Supply The water requirements for the operation of the Plant and the water facilities and on-site storage to be provided as part of the Plant. Effluent limits of segregated wastewater system and location of effluent discharge point. Coal Supply Choice of Coal and Coal Supplier and the Technical Proposal shall specify, amongst others, the following: - Name and details of the Coal Supplier; - Location of coal mine and method of transportation to the plant site - Type and specification of Coal; - Key parameters of the Long Term Coal Supply Contract; - Commercial track record of the Coal Supplier. Details of Coal and Ash Handling Facilities as may be required at the Plant Site to meet or exceed the requirements of the Minimum Functional Specification. Electrical Interconnection Single line diagram up to the Interconnection Point showing all circuit breakers, isolators, Metering Point, current and potential transformers for metering and protection, earthing switches, lightning arrestors, power transformers and generators. The maximum make and break fault contributions to PPC’s Grid System from the Plant at 150 kV, including motor and generator contributions. Instrumentation and Control Instrumentation, control and protection systems including the relay protection scheme proposed by the Bidder for line, busbars, transformers, generators, etc. THE INSTITUTE FOR PUBLIC-PRIVATE PARTNERSHIPS 191
Page 1 and 2:
Development of Policy, Legal, and I
Page 3 and 4:
31 March 2007 Mr. Constantine Chiko
Page 5 and 6:
Development of Policy, Legal, & Ins
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145: Development of Policy, Legal, & Ins
Page 244 and 245:
Page 246 and 247:
Page 248 and 249:
show all

Development of Policy, Legal, and Insitutional Framework for - ppiaf

Create successful ePaper yourself

Delete template?

Save as template?